Salt, grit and a legacy of roads in disrepair thanks to frost can take a toll on vehicles. Evidence of shock absorbers bearing the brunt of these challenges emerge as motor factors report an upsurge in demand for replacement parts, during Winter and Spring.
BOGE Ensures OE Quality for Safety
Shock absorbers are susceptible to deterioration as a result of exposure to grit, salt and moisture. However, temperatures experienced during a typical UK winter do not tend to cause problems for OE quality shock absorbers.
Despite this, BOGE ensures that their components undergo testing in climate extremes during development. The alloy composition and after-treatment processes used by manufacturers like BOGE, who abide by OE quality standards, are designed to avoid the possibility of brittle fracture.
Symptoms of Defective Shock Absorbers
In critical driving conditions that are especially prevalent in the colder months, defective shock absorbers can be particularly hazardous. Poor performing shock absorbers can lead to a variety of life-threatening scenarios:
- Vehicle can be difficult to control and swerve when cornering
- Vehicle may be over-sensitive to side winds
- Longer braking distances
- “Bottoming out” of shock absorbers when driving over rough roads or deep potholes
- Higher risk of aquaplaning or losing control of the vehicle
Regular Suspension Testing
Due to their safety critical nature, a regular suspension test is recommended for every 20,000km a vehicle travels to ensure that they are working properly.
Unless damaged by force, shock absorbers seldom fail suddenly. Instead, they gradually wear as the driver gets accustomed to the deteriorating damping action.
Installers should always begin by conducting a visual examination. Key issues to look for are:
Worn bump stops
Signs of Unusual Tyre Wear
Distinct Traces of Oil on the Shock Absorber
Not to be confused with natural oil mist/road dirt on the shock absorber or underseal adhering to the outer tube.
During inspection, it is advised to check the condition of shock absorber mounts, steering components and rubber-to-metal parts as well.
Install the Whole Kit
The performance of a newly replaced component compared to a worn one can be considerably different. This adversely affects braking distances and handling balance of the vehicle. Any damping variation between a new and used shock absorber will become very apparent during avoidance manoeuvres. That is why; shocks should always be replaced in pairs.
BOGE offers 300 fitting kits which include ancillary items such as spring assisters (bump stops) and gaiters. They should also be replaced when new shock absorbers are installed. A worn gaiter can deposit grit and salt on the piston rod that will abrade the plating and potentially lead to corrosion and diminish the shock absorber lifespan.
Pioneering Technology & Quality Engineering
Pioneering in shock absorber technology for more than 86 years, BOGE has precisely engineered advanced and quality components at every pivot of automotive history since.
The OE quality of BOGE shock absorbers enables simple replacement with precision parts and provides the assurance of quality, comfort and durability.
With more than 2,700 OE shock absorbers in range, BOGE offers a 2-year/unlimited mileage warranty. For more information, please speak with your local FPS representative.